Roborock Robot vacuum Error 23

What this problem usually means

Could not return to dock (Q5+ manual: clean the dock location beacon and retry; S5 Max-era manual words it as clearing the dock charger's signal emission area). The robot could not find or reach its dock.

Likely causes

  1. Dock location beacon / signal emission area dirty or blocked
  2. Dock unplugged, moved, or surrounded by clutter
  3. Robot started far from the dock with obstacles in the way

How to fix it — step by step

  1. Check the dock is plugged in and powered
  2. Clean the dock location beacon / signal emission area
  3. Clear clutter and keep clear space in front of and beside the dock
  4. Place the robot near the dock and send it to dock again

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →