Roborock Robot vacuum Error 11

What this problem usually means

Strong / high-intensity magnetic field detected (earlier and E-series models). The robot is too close to a magnetic virtual wall / boundary tape when starting, so it will not start there.

Likely causes

  1. Robot starting right next to magnetic virtual-wall tape
  2. Strong magnetic source close to the starting position

How to fix it — step by step

  1. Move the robot well away from the virtual wall / magnetic tape
  2. Place it in an open area away from the boundary strip
  3. Restart cleaning from the new location

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Roborock robot vacuum problems

See all Roborock robot vacuum codes & guides →