Garbage disposal won't run
A disposal that will not run is usually protecting itself or simply has no power — a tripped overload, a jam, or a tripped outlet — rather than a dead motor. The sound it makes tells you where to look: a hum means power is arriving but the flywheel cannot turn, and silence means power is not arriving at all.
First checks — these apply to every brand
- Press the reset button — The disposal has a built-in overload protector that trips when the motor jams or overheats. Switch the disposal off and let the motor cool for 3 to 5 minutes, then reach underneath and lightly press the red reset button on the bottom of the unit. If it had popped out and clicks back in, run cold water and try the switch.
- Free a jam — Turn the power switch off first, and never put your fingers or hand into the disposal. Fit the hex wrench that came with the unit (a 1/4-inch Allen key works) into the socket in the center of the bottom and work it back and forth until the flywheel turns one full revolution; without a wrench, push a broom handle or wooden spoon handle down through the drain against an impeller and lever the flywheel back and forth instead. Fish the freed object out with tongs or pliers, press reset, and test with cold water running.
- Check the power — plug, GFCI and breaker — If the unit is completely silent, work through its power supply before blaming the motor. Confirm the plug is fully in under the sink, press the reset button on the GFCI outlet if it has tripped (plug in a lamp to prove the outlet works), and check the service panel for a tripped breaker or blown fuse.
- Read the hum before you replace anything — A disposal that hums has power but a stuck flywheel — usually something wedged between the impeller and the shredder ring — so switch it off quickly rather than letting it strain, and go back to the jam check. If the flywheel turns freely with the wrench, the reset is in and power is confirmed, yet it still only hums or does nothing, the motor itself has failed; disposals are not repaired internally, so replacement is the fix.
Which is yours?
It hums, but nothing turns - Power is reaching the motor and the flywheel is stuck — that is a jam, not an electrical fault. Switch it off right away so the motor does not overheat, then work the jam check with the hex wrench and press reset.
It is completely silent - No power is reaching the motor, or the overload has tripped. Start with the reset button on the bottom of the unit, then the plug, the GFCI outlet and the breaker, in that order.
More plumbing problems: Toilet won't flush · Toilet keeps running · Sink won't drain · Tub or shower drain is slow
Parts that commonly fix it
- garbage disposal — Shop at Amazon
When to call a pro: Call a plumber or electrician if the breaker trips again the moment the disposal runs, if the unit leaks from its body rather than from the sink flange or the pipe connections, or if you are not comfortable working under a sink where power and water meet. A disposal with a failed motor needs replacing, a job most people hand to a plumber.