Mercedes-Benz Sedan E-Class Random electrical faults after rain
What this problem usually means
Mercedes signal acquisition modules (SAM) sit low in the body, and a blocked drain or a leaking seal lets water reach them. Random electrical faults after heavy rain, and lights that behave strangely, point there first.
Likely causes
- Water reaching a SAM module through a blocked drain or leaking seal
- SAM module water damage/corrosion
How to fix it — step by step
- Note whether faults cluster after rain or a wash
- Check drains and seals around the module locations for blockage/water
- Dry and inspect the SAM and its connectors for corrosion
- Clear the water path and replace the module if it is damaged - electrical diagnosis is specialist work
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the signal acquisition module.
Parts that commonly fix it
- signal acquisition module - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.