Mercedes-Benz Sedan E-Class Coolant leak from plastic cooling parts
What this problem usually means
Mercedes cooling systems use plastic pipes, expansion tanks and thermostat housings that become brittle after years of heat cycles, and the M278 V8 (E 550) is noted for coolant leaks from hoses and pipes in the valley of the engine. Early signs are a sweet coolant smell, a low-coolant message or a gauge that climbs in traffic; pressure-testing finds the leak before parts are replaced.
Likely causes
- Brittle plastic coolant pipes/tanks/housings
- Valley coolant hoses and pipes leaking (M278 V8)
- Thermostat or electric water pump failure → Shop the water pump at Amazon
How to fix it — step by step
- Check coolant level cold; note sweet smell or low-coolant message
- Stop driving if the temperature gauge climbs
- Pressure-test the system to locate the leak
- Replace the failed component and refill with specified coolant
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the thermostat housing.
Shop the thermostat housing at Amazon
Also tied to this fault: coolant expansion tank - Shop at Amazon; water pump - Shop at Amazon
Parts that commonly fix it
- thermostat housing - Shop at Amazon
- coolant expansion tank - Shop at Amazon
- water pump - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.