Mercedes-Benz Sedan E-Class Oil leak from valve cover gasket
What this problem usually means
Valve cover leaks are among the usual visits for the M274 four-cylinder (E 300), and on the M276 V6 (E 350/E 400) the oil filter housing and the oil cooler seals under it harden and leak, with oil able to run onto the belt and exhaust.
Likely causes
- Valve cover gasket hardened with heat (M274) → Shop the valve cover gasket at Amazon
- Oil filter housing and oil cooler seals hardened (M276) → Shop the oil cooler seal at Amazon
How to fix it — step by step
- Check oil level and inspect around the valve cover, filter housing and cooler
- Clean and re-check to confirm the source
- Replace the failed gasket/seals
- Road-test and re-check for leaks
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the valve cover gasket.
Shop the valve cover gasket at Amazon
Also tied to this fault: oil cooler seal - Shop at Amazon
Parts that commonly fix it
- valve cover gasket - Shop at Amazon
- oil cooler seal - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.