LG Washer PE Error Code

What the PE code means

Pressure sensor error: the water level (pressure) sensor cannot measure the water level in the tub.

Likely causes

  1. Moisture / humidity affecting the sensor, e.g. washer installed in a humid bathroom
  2. Failed water level pressure sensor
  3. Clogged or disconnected pressure sensor hose
  4. Control board fault

How to fix it — step by step

  1. Unplug the power cord, wait about 5 minutes, reconnect and start the unit
  2. Make sure you are not using excessive detergent, which can disturb level sensing
  3. Ventilate a very humid laundry room and retry a cycle
  4. If PE keeps appearing, book service

Parts that commonly fix the PE code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related LG washer error codes

See all LG washer codes & guides →