LG Washer AE Error Code
What the AE code means
Rotation error on top-load models: the gears responsible for rotating the drum cannot operate properly. On some front-load models AE is also used for a leak detected in the base.
Likely causes
- Coin or foreign object trapped between the wash plate and drum interfering with the gear or motor
- Motor / gear fault
- On front-load models, water leaking into the base pan
How to fix it — step by step
- Unplug the washer and, on top-load models, check between the wash plate and drum for trapped coins or objects, removing them with tweezers
- On front-load models, turn off both water taps and check hose connections and the door seal for drips
- Plug back in and run a short test cycle
- If there is no trapped object but noise continues or the drum will not rotate, book service
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the drive motor.
Shop the drive motor at RepairClinic or Amazon
Also tied to this fault: leak sensor - Shop at RepairClinic or Amazon; door gasket - Shop at RepairClinic or Amazon
Parts that commonly fix the AE code
- drive motor - Shop at RepairClinic or Amazon
- leak sensor - Shop at RepairClinic or Amazon
- door gasket - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official LG manual is on LG's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.