LG Washer CE Error Code
What the CE code means
Current error: the motor control component is damaged or drawing excess current. LG states this cannot be resolved with basic troubleshooting and requires service.
Likely causes
- Damaged motor control component / main control board → Shop the main control board at RepairClinic
- Motor overload or short
- Wiring fault to the motor
How to fix it — step by step
- Unplug the washer for about 5-10 minutes, then plug it back in and try one restart
- Reduce the load and check the drum turns freely by hand and has no trapped objects
- If CE returns, stop using the washer and book service - do not keep restarting it
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the main control board.
Shop the main control board at RepairClinic or Amazon
Also tied to this fault: drive motor - Shop at RepairClinic or Amazon
Parts that commonly fix the CE code
- main control board - Shop at RepairClinic or Amazon
- drive motor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official LG manual is on LG's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.