Lexus SUV NX (AZ10, 2015–2021) Rough idle from clogged EGR valve and cooler

What this problem usually means

The cooled EGR circuit of the NX 300h hybrid's Atkinson-cycle engine clogs with soot with age: the valve, cooler and intake passages fill with deposits, causing code P0401 (insufficient EGR flow) and rough running, per What-Breaks' NX AZ10 guide. Cleaning usually resolves it.

Likely causes

  1. Soot clogging of the EGR valve, cooler and intake passages
  2. Age and hybrid short-cycle running building up deposits

How to fix it — step by step

  1. Confirm a P0401 code alongside rough idle, cold-start rattle, or mild loss of power and economy
  2. Rule out ignition and fuel causes before removing EGR parts
  3. Have the EGR valve, cooler and passages cleaned of soot deposits → Shop the egr valve at Amazon
  4. Clear the code and confirm smooth running through a full drive cycle

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Lexus SUV NX (AZ10, 2015–2021) problems

See all Lexus NX (AZ10, 2015–2021) codes & guides →