Lexus SUV NX (AZ10, 2015–2021) Hybrid system overheating from inverter coolant pump failure

What this problem usually means

The electric coolant pump for the hybrid inverter on the NX 300h can fail and let the hybrid system overheat, per What-Breaks' NX AZ10 guide. Preventive replacement around 75,000 miles is recommended but is frequently skipped because the pump is buried and labor-intensive to access.

Likely causes

  1. Failed electric inverter coolant pump
  2. Skipped preventive replacement of the buried pump

How to fix it — step by step

  1. Note hybrid system warnings, reduced power, inverter overheating codes, or power loss during sustained driving
  2. Check the separate inverter coolant reservoir level when the system is cold
  3. Have inverter fault codes read to confirm pump failure rather than an inverter fault
  4. Replace the inverter coolant pump and bleed the hybrid cooling loop → Shop the inverter coolant pump at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Lexus SUV NX (AZ10, 2015–2021) problems

See all Lexus NX (AZ10, 2015–2021) codes & guides →