Lexus SUV NX (AZ10, 2015–2021) Hesitation and power loss from turbo valve failure
What this problem usually means
The vacuum regulating valve for the turbocharger bypass on 2015-2016 NX 200t models can fail, causing unstable engine operation at high speed with power dips, per What-Breaks' NX AZ10 guide. A TSB was issued, post-2017 turbochargers are improved, and most early failures were replaced under warranty.
Likely causes
- Failed vacuum regulating valve for the turbine bypass on 2015-2016 production units
- Early-production turbocharger design, improved from 2017
How to fix it — step by step
- Note the pattern: power dips at high speed, unstable acceleration, turbo noise changes, or a check engine light
- Have fault codes read to confirm a turbo bypass/valve fault before buying parts
- Ask a Lexus dealer whether the TSB repair was already performed on the car
- Replace the vacuum regulating valve if testing confirms it has failed → Shop the vacuum regulating valve at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the vacuum regulating valve.
Parts that commonly fix it
- vacuum regulating valve - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.