Land Rover SUV Discovery Rattling noise from supercharger

What this problem usually means

On the Discovery 5's 5.0-litre supercharged V8, the Eaton supercharger's torsional coupler - a plastic and metal spring assembly - breaks apart over time; Land Rover issued a TSB for it. The rattle sounds like gravel or stones inside the supercharger at idle and disappears under higher load, and supercharger output falls as it worsens.

Likely causes

  1. Supercharger torsional coupler breaking apart (Land Rover TSB issued)
  2. Higher load of the supercharged engine accelerating coupler wear

How to fix it — step by step

  1. Listen at idle: a gravel-like rattle from the supercharger that fades as revs/load rise points at the coupler, not the timing chain → Shop the supercharger coupler at Amazon
  2. Check for reduced boost/power alongside the noise
  3. Have a specialist confirm coupler failure before ordering parts - timing chain rattle on this engine sounds similar but is a different repair
  4. Replace the supercharger coupler (and inspect the timing chain set while the front of the engine is assessed)

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Land Rover SUV Discovery problems

See all Land Rover Discovery codes & guides →