Land Rover SUV Discovery Engine knocking noise
What this problem usually means
On Discovery models with the 3.0-litre V6 diesel (306DT), the crankshaft uses the same narrow bearing design as the earlier 2.7: bearing shells can spin in operation and block oil galleries, a fault documented in Land Rover service bulletin SSM71816. Symptoms are a rhythmic knocking from the lower engine block that is worse under load, oil pressure loss, and metal particles in the oil filter.
Likely causes
- Crankshaft bearing shells spinning and blocking oil galleries (service bulletin SSM71816)
- Stretched oil change intervals accelerating bearing wear
How to fix it — step by step
- If knocking appears with an oil pressure warning, stop the engine immediately and do not restart it
- Check for metal particles in the oil filter at the next inspection - a key confirmation sign
- Have the vehicle recovered to a Land Rover specialist for crankshaft/bearing inspection → Shop the crankshaft bearing at Amazon
- Repair is internal engine work and can extend to engine replacement depending on damage
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the crankshaft bearing.
Parts that commonly fix it
- crankshaft bearing - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.