Land Rover SUV Discovery Infotainment screen freezes or fails to start
What this problem usually means
On the Discovery 5 (L462), the InControl Touch Pro infotainment system is documented to freeze or fail to start. Weak 12-volt battery voltage can make the screen shut down to save power and can set warnings in several systems at once, so battery health is part of the diagnosis.
Likely causes
- InControl Touch Pro software/hardware fault
- Weak 12-volt battery causing the screen to shut down to save power
- Module communication faults on the vehicle's networks
How to fix it — step by step
- Note whether the freeze happens from a cold start and whether other warnings appear at the same time
- Have the 12-volt battery and charging system tested first - Land Rovers are very sensitive to battery voltage
- Check for and apply infotainment software updates
- If the fault persists on a healthy battery, have the infotainment module diagnosed with JLR-level tools
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the infotainment control module.
Shop the infotainment control module at Amazon
Also tied to this fault: 12v battery - Shop at Amazon
Parts that commonly fix it
- infotainment control module - Shop at Amazon
- 12v battery - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.