Land Rover SUV Discovery Check Engine Light On

What this problem usually means

On the Discovery the engine management light is most often the first electronic sign of the model's known timing chain problem. AutoFixFair describes the 2.7 TDV6 and 3.0 SDV6 diesels in the Discovery 3 and 4 as sharing a rear-mounted timing chain that stretches and eventually slips, with a cold-start rattle, rough running and the engine management light among the symptoms. The Discovery 5's 2.0-litre Ingenium diesel has the same pattern per LRDirect: chain stretch brings the check engine light on with correlation codes P0016 or P0341, worsened by oil dilution from incomplete DPF regenerations. The LR4 (the Discovery 4's North American name) is also named in Land Rover bulletin LTB00409NAS3 for 5.0 V8 petrol misfires with the MIL on, caused by clogged fuel injectors.

Likely causes

  1. Stretched rear-mounted timing chain on the TDV6 and SDV6 diesels (Discovery 3 and 4)
  2. Stretched timing chain on the Discovery 5's 2.0 Ingenium diesel, typically from around 60,000 miles
  3. Oil dilution from incomplete DPF regenerations accelerating chain and guide wear on Ingenium diesels
  4. Clogged fuel injectors from poor fuel quality or contamination on the 5.0 V8 petrol LR4 (bulletin LTB00409NAS3) → Shop the fuel injectors at Amazon

How to fix it — step by step

  1. Note whether the light is solid or flashing, and stop driving on a flashing light, which means a live misfire
  2. Read the exact codes with an OBD-II scanner and write them down: P0016 or P0341 correlation codes point at the timing chain, P0300-series codes at a misfire → Shop the timing chain kit at Amazon → Shop the obd-ii scanner at Amazon
  3. Do a cold-start listening test for a rattle or ticking from the rear of the engine that clears as oil pressure builds; any TDV6 or SDV6 rattle is a serious warning, not a quirk
  4. On an Ingenium diesel, check the oil level and smell for fuel: a rising level means DPF-regeneration dilution is thinning the oil
  5. Do not keep driving a rattling diesel hoping it will settle; a jumped or snapped chain usually destroys the engine
  6. Have a Land Rover specialist confirm chain stretch before authorising a timing chain kit, then clear the codes and confirm the light stays off through a full drive cycle

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Land Rover SUV Discovery problems

See all Land Rover Discovery codes & guides →