Kia SUV Telluride High beams stop working
What this problem usually means
On 2020-2021 Tellurides, heat from the headlamp can damage the gear that moves the high-beam shutter, so the high beams can stop working. Kia recalled 35,031 of the affected SUVs, and dealers clip the gear to its shaft or replace the headlamp.
Likely causes
- heat-damaged high-beam shutter gear in the headlamp
How to fix it — step by step
- Test the high beams in the dark and note whether one or both fail to switch on
- Check by VIN whether the headlamp recall applies and was completed
- Avoid night driving on unlit roads until the high beams work again
- Have a dealer apply the recall remedy - clipping the gear to its shaft or replacing the headlamp assembly
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the headlight assembly.
Parts that commonly fix it
- headlight assembly - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.