Kia SUV Telluride Collision Warning Activates Incorrectly

What this problem usually means

RepairPal's most-reported Telluride problem is the collision warning activating incorrectly, paired in owner reports with speedometer malfunction - a combination that points at the forward sensing and instrument cluster rather than driver error. Unexpected warnings (or braking interventions) with a clear road ahead should be logged with speed and conditions, because dealers need a pattern to chase calibration faults.

Likely causes

  1. Forward camera/radar misreading the road or roadside objects → Shop the forward camera at Amazon
  2. Sensor bracket or windshield camera area shifted/blocked
  3. Instrument cluster/speedometer fault undermining the warning logic → Shop the instrument cluster at Amazon
  4. Software/calibration fault in the driver-assistance system

How to fix it — step by step

  1. Log each false event with speed, weather, and what was near the road - patterns separate sensor faults from real triggers
  2. Clean the windshield camera zone and front sensor cover and check for chips or damage
  3. Check whether the speedometer also misbehaves at the same time, and tell the dealer - the pairing is documented on this model
  4. Scan for ADAS and cluster fault codes even if warnings clear themselves
  5. Have camera/radar calibration checked by a dealer or ADAS-equipped shop; do not just disable the system permanently

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia SUV Telluride problems

See all Kia Telluride codes & guides →