Kia Sedan Stinger Rattling noises

What this problem usually means

Some Stinger owners complain about rattling noises while driving, which can come from the trunk area, a loose license plate, the exhaust heat shield or the engine area. Inside the cabin the noise most often comes from the suspension on 2018 and 2020 models, with ball joints, struts and sway bar links the usual sources.

Likely causes

  1. worn ball joints, struts or sway bar links
  2. loose exhaust heat shield → Shop the exhaust heat shield at Amazon
  3. loose trunk latch or license plate

How to fix it — step by step

  1. Empty the trunk and spare tire well, then test drive to rule out loose items
  2. Note whether the rattle comes from the front, rear or engine area and whether it happens over bumps
  3. Check the license plate screws and the heat shield fasteners for looseness
  4. Have a shop inspect the ball joints, struts and sway bar links if the rattle is from the suspension → Shop the sway bar links at Amazon → Shop the ball joints at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia Sedan Stinger problems

See all Kia Stinger codes & guides →