Kia Sedan Stinger Front wiring harness chafes and shorts
What this problem usually means
On 2018 Stingers the front wiring harness can rub against a burr on the left fender panel, get damaged and short-circuit, raising the risk of a fire under NHTSA recall 18V754. Dealers inspect the harness, fit a protective cover and replace the harness if it is damaged, free of charge.
Likely causes
- front wiring harness chafing on a burr on the left fender panel → Shop the front wiring harness at Amazon
- damaged harness insulation causing a short circuit
How to fix it — step by step
- Check by VIN for recall 18V754
- Watch for intermittent electrical faults or a burning smell
- Have a dealer inspect the harness and fit the protective cover free of charge
- Have the wiring harness replaced if chafe damage is found
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the front wiring harness.
Parts that commonly fix it
- front wiring harness - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.