Kia Sedan Stinger Engine loses power - fuel pump valve sticks
What this problem usually means
On 2018-2021 Stingers the fuel control valve plunger can stick inside the high-pressure fuel pump, over-pressurizing the fuel system and causing a loss of drive power, under NHTSA recall 23V634. Dealers update the engine computer software and replace the pump as needed, free of charge.
Likely causes
- sticking fuel control valve plunger in the high-pressure fuel pump
- fuel system over-pressurization
How to fix it — step by step
- Check by VIN for recall 23V634
- Note whether the check engine light comes on together with stumbling or loss of power
- Have a dealer apply the recall software update and test the fuel pump
- Have the high-pressure fuel pump replaced if the sticking valve is confirmed → Shop the high-pressure fuel pump at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the high-pressure fuel pump.
Parts that commonly fix it
- high-pressure fuel pump - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.