Kia Sedan Stinger Brake noise and early wear
What this problem usually means
Some Stingers have braking system issues that appear from around 24,000 miles, prevalent on 2018 and 2020 models, with owners reporting noise when turning the wheels and a burning smell when applying the brakes. The brakes are prone to wear because the rotors on these performance cars are softer than most, and replacing the rotors typically resolves the early wear issue.
Likely causes
- worn brake rotors → Shop the brake rotors at Amazon
- worn brake pads → Shop the brake pads at Amazon
How to fix it — step by step
- Note whether the noise or smell happens when braking, when turning, or both
- Have a shop measure pad and rotor thickness and check for scoring
- Replace worn rotors and pads in axle pairs
- Re-check for noise after the new brakes have bedded in
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the brake rotors.
Shop the brake rotors at Amazon
Also tied to this fault: brake pads - Shop at Amazon
Parts that commonly fix it
- brake rotors - Shop at Amazon
- brake pads - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.