iRobot Floor scrubber Scooba 450 I can't detect my tank. Please make sure it is installed correctly, then press CLEAN to restart.
What this problem usually means
Spoken error message (yellow information indicator): the tank is missing or not installed properly, or the tank presence sensor is erroneously not detecting the tank.
Likely causes
- Tank is missing or is not installed properly
- Tank presence sensor is erroneously not detecting the tank
- Dirty metal contacts between the tank and robot
How to fix it — step by step
- Remove the tank and wipe the metal contacts between the tank and robot with a clean, dry cloth
- Correctly and fully attach the tank
- If the problem persists with the tank installed, turn Scooba on and press CLEAN 3 times to start the cleaning cycle (repeat this if you remove and reinstall the battery)
- Contact iRobot Customer Care if the message persists
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related iRobot Floor scrubber Scooba 450 problems
- I want to keep cleaning, but my dirty tank is full. Please empty it, then press CLEAN to restart.
- I'd love to start cleaning, but my battery isn't quite full. Please charge me completely.
- I'm stuck. Please move me, then press CLEAN to restart.
- It looks like something is blocking the sensors on the bottom of my bumper. Please check then press CLEAN to restart.
- My front wheel is missing. Please check then press CLEAN to restart.
- Please check that my clean tank is full, then press CLEAN to restart.
- Something might be stuck in my brushes. Please check, then press CLEAN to restart.
- Something might be stuck in my bumper. Please check, then press CLEAN to restart.
- Something might be stuck in my wheels. Please check, then press CLEAN to restart.
- The inside of my tank is dirty or my brush assembly is missing. Please check, then press CLEAN to restart.
- Error 1
- Error 1-1