iRobot Floor scrubber Scooba 450 Please check that my clean tank is full, then press CLEAN to restart.

What this problem usually means

Spoken error message (yellow information indicator): Scooba's clean tank is empty, its empty sensor is misreading because of poor electrical connections or distilled water, or the pump is not pumping sufficient fluid from the clean tank.

Likely causes

  1. Clean tank is empty
  2. Clean tank empty sensor is incorrectly detecting an empty tank because of poor electrical connections / debris on the metal connections between tank and robot
  3. Clean tank empty sensor is incorrectly detecting an empty tank because distilled water is being used
  4. Pump is not pumping sufficient fluid from the clean tank

How to fix it — step by step

  1. Check if the clean water tank is empty and, if so, add water and Scooba Hard Floor Cleaner to the tank
  2. Check for debris on the metal connections between the tank and the robot and clean them
  3. Use tap water or add Scooba Hard Floor Cleaner to the tank instead of distilled water
  4. Turn Scooba off and press CLEAN to restart pump priming
  5. Press CLEAN to restart

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related iRobot Floor scrubber Scooba 450 problems

See all iRobot Scooba 450 codes & guides →