iRobot Floor scrubber Scooba 450 Something might be stuck in my brushes. Please check, then press CLEAN to restart.
What this problem usually means
Spoken error message (yellow information indicator): Scooba is not able to spin its roller brush easily, the brush gear is not engaged properly, or the gearbox is damaged.
Likely causes
- Debris stuck on the roller brush, particularly under the yellow end caps
- Brush is not connected to the brush motor because the brush gear is not engaged properly
- Brush is not connected to the brush motor because the gearbox is damaged
How to fix it — step by step
- Check for debris stuck on the roller brush, particularly under the yellow end caps, and remove the debris
- Verify the roller brush is properly installed in the cleaning head and the cleaning head is properly installed
- Check if the brush spins with no resistance at all - if so, call iRobot support
- Press CLEAN to restart
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related iRobot Floor scrubber Scooba 450 problems
- Something might be stuck in my bumper. Please check, then press CLEAN to restart.
- Something might be stuck in my wheels. Please check, then press CLEAN to restart.
- The inside of my tank is dirty or my brush assembly is missing. Please check, then press CLEAN to restart.
- Error 1
- Error 1-1
- Error 1-2
- Error 1-3
- Error 1-4
- Error 1-5
- Error 1-6
- Error 1-7
- Error 1-8