iRobot Floor scrubber Scooba 450 It looks like something is blocking the sensors on the bottom of my bumper. Please check then press CLEAN to restart.
What this problem usually means
Spoken error message (yellow information indicator): Scooba's cliff detection sensors are dirty and blocked, or the sensors are seeing black matte flooring as a cliff.
Likely causes
- Cliff detection sensors are dirty and blocked
- Cliff detection sensors are seeing black matte flooring as a cliff
How to fix it — step by step
- Check if there is debris stuck to the cliff sensors on the robot and clean them
- Check if the robot is stuck on a black surface and move it to a new location if so
- Press CLEAN to restart
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related iRobot Floor scrubber Scooba 450 problems
- My front wheel is missing. Please check then press CLEAN to restart.
- Please check that my clean tank is full, then press CLEAN to restart.
- Something might be stuck in my brushes. Please check, then press CLEAN to restart.
- Something might be stuck in my bumper. Please check, then press CLEAN to restart.
- Something might be stuck in my wheels. Please check, then press CLEAN to restart.
- The inside of my tank is dirty or my brush assembly is missing. Please check, then press CLEAN to restart.
- Error 1
- Error 1-1
- Error 1-2
- Error 1-3
- Error 1-4
- Error 1-5