Goodman Furnace EE1 Error Code

What the EE1 code means

Pressure switch circuit closed at the start of a heat cycle on newer Goodman single-stage furnaces with the alphanumeric display control. The switch should be open before the inducer starts.

Likely causes

  1. sticking pressure switch contacts
  2. short in pressure switch wiring
  3. water in the pressure switch hose

How to fix it — step by step

  1. Check the thermostat is set to Heat and calling for heat
  2. Check the outdoor vent and intake pipes are clear of snow, ice or debris
  3. On a high-efficiency model, check the condensate drain line and trap are not clogged or frozen
  4. Turn power off at the furnace switch for 30 seconds, then back on, and try one heat call
  5. If the code returns, stop resetting and call a licensed HVAC technician

Parts that commonly fix the EE1 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Goodman furnace error codes

See all Goodman furnace codes & guides →