GMC Truck Canyon Transmission shudder from slipping torque converter
What this problem usually means
Transmission problems on 2018 GMC Canyons typically involve a slipping torque converter, which can cause the transmission to shift dangerously hard. Several 2017 Canyon owners have also complained that the transmission chugged, jerked or shuddered.
Likely causes
- slipping torque converter
How to fix it — step by step
- Test drive at a steady light throttle and note the speed at which the shudder or chug appears
- Note whether shifts have become dangerously hard as the shudder developed
- Have a shop confirm the torque converter is slipping rather than an engine misfire causing the shudder → Shop the torque converter at Amazon
- Have a transmission shop replace the failed torque converter if confirmed
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the torque converter.
Parts that commonly fix it
- torque converter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.