GMC Truck Canyon Engine stalls, misfires and shuts off

What this problem usually means

Some GMC Canyon engines can break down as early as 3,000 miles, with owners reporting stalling, engine misfires, hesitation and refusing to start. The worst cases were in the 2015 model year, where trucks ran roughly or stalled when changing speed and the engine could cut off and shut down without warning while speeding up or slowing down.

Likely causes

  1. engine misfires and stalling
  2. engine cutting out when changing speed

How to fix it — step by step

  1. Note whether the stall happens when speeding up, slowing down or at idle, and whether the check engine light is on → Shop the engine at Amazon
  2. Do not keep driving a truck that shuts off without warning in traffic — arrange a tow if it recurs
  3. Have a shop scan for misfire codes and check why the engine is refusing to start or hesitating
  4. Have a shop repair the cause of the misfire or shutdown before using the truck normally

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related GMC Truck Canyon problems

See all GMC Canyon codes & guides →