GMC Truck Canyon Power steering assist turns off while driving
What this problem usually means
The 2015 GMC Canyon received many complaints that power steering assist often turns off while driving, increasing the risk of an accident, and the power steering can also fail outright or drift to one side. Replacing the steering rack and pinion can fix the problem but assist may still fail afterward, and some 2017 owners reported a steering column failing at just 4,000 miles.
Likely causes
- failing power steering system
- faulty steering rack and pinion
- premature steering column failure
How to fix it — step by step
- Do not keep driving if the wheel suddenly becomes very heavy — pull over safely
- Note whether assist cuts out intermittently or has failed completely, and whether the truck drifts to one side
- Check by VIN whether any steering recall applies to the truck
- Have a shop test the power steering system and replace the steering rack and pinion or steering column as found → Shop the steering rack and pinion at Amazon → Shop the steering column at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the steering rack and pinion.
Shop the steering rack and pinion at Amazon
Also tied to this fault: steering column - Shop at Amazon
Parts that commonly fix it
- steering rack and pinion - Shop at Amazon
- steering column - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.