GMC Truck Canyon Rough and delayed shifting
What this problem usually means
Many owners of 2015-2020 GMC Canyons have complained about a troublesome transmission, with the 2015 model reporting the most problems and the 2016 close behind. Trucks can take too long to upshift or downshift or shift roughly, which can cause jerking and make the truck difficult to control in the wrong gear.
Likely causes
- transmission shifting fault on 2015-2020 trucks
How to fix it — step by step
- Note which gear changes are slow or rough and at what speeds they happen
- Check whether the truck has also moved while in park or stuck the automatic 4WD in low gear — report either to a shop at once
- Have a shop scan the transmission for fault codes and check the fluid condition → Shop the transmission at Amazon
- Have a transmission shop repair the shifting fault before it develops into transmission failure
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the transmission.
Parts that commonly fix it
- transmission - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.