GE Washer Front-Load E48 Error Code
What the E48 code means
Open motor phase on GE front-load washers: one phase/winding of the drive motor is open, so the motor cannot run correctly.
Likely causes
- Open drive motor winding (failed motor) → Shop the drive motor at RepairClinic
- Disconnected or damaged motor wiring harness
- Loose motor connector
How to fix it — step by step
- Unplug the washer for a few minutes, then restore power and try once
- Check the basket is not jammed and turns by hand
- If the motor still will not run, the motor or its harness needs professional replacement
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the drive motor.
Parts that commonly fix the E48 code
- drive motor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.