GE Dryer GFD Series 00d Error Code
What the 00d code means
On GE GFD model dryers: door switch not opening - the alternate display of code 008, set when 5 cycles ran without the door switch opening.
Likely causes
- Failed door switch stuck closed
- Loose wires on the door switch
- Damaged wire harness → Shop the wire harness at RepairClinic
How to fix it — step by step
- Unplug the dryer
- Open and close the door firmly and check the door strike area is clear
- If 00d returns, arrange service for the door switch → Shop the door switch at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the door switch.
Shop the door switch at RepairClinic or Amazon
Also tied to this fault: wire harness - Shop at RepairClinic or Amazon
Parts that commonly fix the 00d code
- door switch - Shop at RepairClinic or Amazon
- wire harness - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.