GE Dryer GFD Series 003 Error Code
What the 003 code means
On GE GFD model dryers: the inlet thermistor (temperature sensor) is defective - the second of the two inlet-thermistor codes (001 or 003).
Likely causes
- Failed inlet thermistor → Shop the inlet thermistor at RepairClinic
- Loose wires on the inlet thermistor
- Damaged wire harness → Shop the wire harness at RepairClinic
How to fix it — step by step
- Unplug the dryer and let it cool completely
- Clean the lint filter and check venting, then try one cycle
- If 003 returns, arrange service for thermistor testing/replacement
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the inlet thermistor.
Shop the inlet thermistor at RepairClinic or Amazon
Also tied to this fault: wire harness - Shop at RepairClinic or Amazon
Parts that commonly fix the 003 code
- inlet thermistor - Shop at RepairClinic or Amazon
- wire harness - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.