GE Dryer GFD Series 001 Error Code
What the 001 code means
On GE GFD model dryers: the inlet thermistor (temperature sensor) is defective - 001 and 003 both flag the inlet thermistor, which measures heated air entering the drum on the inlet air duct.
Likely causes
- Failed inlet thermistor → Shop the inlet thermistor at RepairClinic
- Loose wires on the inlet thermistor
- Damaged wire harness → Shop the wire harness at RepairClinic
How to fix it — step by step
- Unplug the dryer and let it cool completely
- Clean the lint filter and check the vent for restrictions, then try one cycle
- If 001 returns, stop - the thermistor and its wiring need professional testing and replacement
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the inlet thermistor.
Shop the inlet thermistor at RepairClinic or Amazon
Also tied to this fault: wire harness - Shop at RepairClinic or Amazon
Parts that commonly fix the 001 code
- inlet thermistor - Shop at RepairClinic or Amazon
- wire harness - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.