GE Dryer GFD Series 007 Error Code
What the 007 code means
On GE GFD model dryers: the power supply is mis-wired - Line 2 (L2) and Neutral (N) are reversed at the terminal block.
Likely causes
- Power cord wired incorrectly at the terminal block
- Outlet / branch circuit wired incorrectly
- Wiring changed during a recent cord replacement or move
How to fix it — step by step
- Unplug the dryer and do not use it until the wiring is corrected
- Do not open the terminal block yourself unless you are qualified - this is mains wiring
- Have an electrician or appliance technician correct the cord connections following the installation instructions
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the 007 code
No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.