GE Dryer CleanSpeak GTD81 Series F08 Error Code
What the F08 code means
On GE CleanSpeak GTD81 dryers (technical service manual fault chart): Door Switch Stuck Closed - set when the door has not opened for 5 cycles; cleared when the door switch opens.
Likely causes
- Failed door switch stuck closed
- Loose door switch wiring
- Door switch actuator problem
How to fix it — step by step
- Open and close the door several times - the fault clears when the switch opens → Shop the door switch at RepairClinic
- Check nothing is jamming the door strike area
- Unplug for a few minutes and try a cycle
- If F08 returns, the door switch needs replacement
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the door switch.
Parts that commonly fix the F08 code
- door switch - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.
Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.