GE Dryer CleanSpeak GTD81 Series F01 Error Code

What the F01 code means

On GE CleanSpeak GTD81 dryers (technical service manual fault chart): Inlet thermistor short circuit. The manual advises replacing the thermistor or reviewing its connection if the temperature is above 120F, otherwise clearing the fault.

Likely causes

  1. Shorted inlet thermistor → Shop the inlet thermistor at RepairClinic
  2. Damaged thermistor wiring/connection
  3. Overheated sensor circuit

How to fix it — step by step

  1. Unplug the dryer and let it cool fully
  2. Clean the lint filter and clear any vent restriction that caused overheating
  3. Restore power and try one cycle
  4. If F01 returns, the thermistor needs professional testing/replacement

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F01 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.

Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.

Related GE Dryer CleanSpeak GTD81 Series error codes

See all GE CleanSpeak GTD81 Series codes & guides →