GE Dryer CleanSpeak GTD81 Series F07 Error Code

What the F07 code means

On GE CleanSpeak GTD81 dryers (technical service manual fault chart): Mis-wire - the neutral wire is improperly connected; ensure proper neutral to the center terminal, then clear the code.

Likely causes

  1. Power cord neutral connected to the wrong terminal
  2. Incorrect outlet wiring
  3. Wiring error after a cord change or move

How to fix it — step by step

  1. Unplug the dryer and do not use it until corrected
  2. Have an electrician or technician correct the neutral connection at the center terminal - this is mains wiring
  3. Clear the code once the connection has been corrected

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the F07 code

No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official GE manual is on GE's support site — you'll need your model number.

Find your model number inside the door on the frame. It's the key to the right manual pages and the right parts.

Related GE Dryer CleanSpeak GTD81 Series error codes

See all GE CleanSpeak GTD81 Series codes & guides →