Frigidaire Washer Top-Load F2 Error Code
What the F2 code means
Too many suds: excess foam from too much detergent or non-HE detergent is overflowing or confusing the washer.
Likely causes
- Too much detergent used
- Non-high-efficiency detergent in an HE washer
- Very soft water making extra suds
How to fix it — step by step
- Let the washer sit so the suds break down
- Run a rinse and spin cycle with no detergent
- Use only HE detergent in the amount shown on the package
- Wipe up any suds that overflowed onto the floor
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the F2 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Frigidaire manual is on Frigidaire's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.