Frigidaire Washer Top-Load E5 Error Code
What the E5 code means
The top-load washer is not level, which can cause vibration, noise and poor spin performance.
Likely causes
- Leveling legs uneven
- Washer moved or floor flexing under the washer
- Heavy load shifting the machine
How to fix it — step by step
- Check the washer does not rock when you push on opposite corners
- Adjust the leveling legs until the washer is stable and level
- Lock the leg nuts if your model has them
- Run a spin cycle to confirm the code clears
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the E5 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Frigidaire manual is on Frigidaire's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.