Ford SUV Escape Transfer case grinding noise
What this problem usually means
Some four-wheel-drive Escapes from 2001 to 2016 develop an abnormal transfer case noise that starts like a bearing grinding and becomes a clicking noise at higher speeds. Inside, the gears can shred themselves apart or break the connecting shaft, making repair or replacement expensive.
Likely causes
- internal transfer case gear wear
- broken transfer case shaft
How to fix it — step by step
- Stop driving if the noise turns to loud grinding or drive is lost, and park safely
- Listen for grinding at low speed that changes to clicking as speed rises
- Have a shop inspect the transfer case and its fluid for metal debris → Shop the transfer case at Amazon
- Repair or replace the transfer case depending on the internal damage found
- Road-test in four-wheel drive and confirm the noise is gone
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the transfer case.
Parts that commonly fix it
- transfer case - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.