Ford SUV Escape Blower motor only works on high

What this problem usually means

One of the most common issues on 2005 to 2012 Escapes is an air conditioning blower motor that only works on the highest setting. It is usually caused by a failed resistor behind the glove box next to the blower motor, and is one of the least expensive Escape faults to fix.

Likely causes

  1. failed blower motor resistor

How to fix it — step by step

  1. Test every fan speed and confirm only the highest setting works
  2. Check the fuse before assuming a component has failed
  3. Access the resistor behind the glove box next to the blower motor → Shop the blower motor resistor at Amazon
  4. Replace the blower motor resistor
  5. Confirm all fan speeds work normally

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Ford SUV Escape problems

See all Ford Escape codes & guides →