Ford SUV Escape Coolant leaking into cylinders
What this problem usually means
The 2013 Escape drew vast numbers of complaints for engines stalling, leaking oil and coolant, overheating, and blowing head gaskets. Some owners reported the engine block itself cracking, letting coolant enter the cylinders and causing engine failure.
Likely causes
- blown head gasket
- cracked engine block
- coolant loss and overheating
How to fix it — step by step
- Stop driving if the temperature gauge rises, white smoke appears, or the engine stalls
- Check the coolant level when the engine is cold and look for rapid loss
- Have a shop pressure-test the cooling system and test for combustion gases in the coolant
- Repair the head gasket or replace the engine if the block is cracked → Shop the head gasket at Amazon
- Refill, bleed the cooling system, and monitor coolant level closely after repair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the head gasket.
Parts that commonly fix it
- head gasket - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.