Ford SUV Escape Engine misfiring

What this problem usually means

Ford Escapes from 2001 to 2013 commonly misfire because the ignition coil packs fail, according to RepairPal reports summarized by CarBuzz. Without power from the coil pack, the spark plug cannot ignite the mixture in that cylinder, and driving on a misfire can plug the catalytic converter.

Likely causes

  1. failing ignition coil packs → Shop the ignition coil packs at Amazon
  2. worn spark plugs → Shop the spark plugs at Amazon

How to fix it — step by step

  1. Scan for misfire codes to identify which cylinder is affected
  2. Note whether the misfire is constant or only under load
  3. Swap or test the coil pack on the affected cylinder to confirm it is faulty
  4. Replace the failed ignition coil pack and inspect the spark plug on that cylinder
  5. Clear the codes and road-test to confirm smooth acceleration and normal fuel economy

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Ford manual is on Ford's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Ford SUV Escape problems

See all Ford Escape codes & guides →