Ecovacs Robot vacuum Deebot T9 DEEBOT is stuck when cleaning with OZMO Pro installed
What this problem usually means
With the OZMO Pro oscillating mopping system fitted, the robot gets stuck.
Likely causes
- DEEBOT may have difficulty climbing over obstacles when using OZMO Pro
How to fix it — step by step
- Assist DEEBOT if there is a problem when it is cleaning with OZMO Pro installed
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot T9 problems
- DEEBOT misses cleaning spots to be cleaned, or repeats cleaning the area cleaned
- DEEBOT returns to the Docking Station before it has finished cleaning
- DEEBOT Side Brushes drop out of place during use
- AIVI Visual Detection Sensor cannot recognize objects
- AUTO Mode Button flashes RED
- AUTO Mode Button glows a solid RED (low battery)
- DEEBOT cannot return to the Docking Station
- DEEBOT does not clean automatically at the scheduled time
- DEEBOT does not clean the whole area
- DEEBOT gets stuck while working and stops
- DEEBOT is not able to connect to the home Wi-Fi network
- DEEBOT is not charging