Ecovacs Deebot T9 Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 13 problems covered.
Shop Ecovacs Deebot T9 parts at Amazon
- AIVI Visual Detection Sensor cannot recognize objects — The AIVI camera sensor fails to identify objects in front of the robot.
- AUTO Mode Button flashes RED — The indicator light and a voice report are how this DEEBOT announces a fault: a flashing red AUTO button means the robot has a problem.
- AUTO Mode Button glows a solid RED (low battery) — A solid red AUTO button means the robot's battery is low.
- DEEBOT cannot return to the Docking Station — The robot cannot find or reach its Docking Station to recharge.
- DEEBOT does not clean automatically at the scheduled time — A programmed cleaning time passes and the robot does not start.
- DEEBOT does not clean the whole area — The robot finishes without covering the whole cleaning area.
- DEEBOT gets stuck while working and stops — The robot becomes tangled or trapped and stops cleaning.
- DEEBOT is not able to connect to the home Wi-Fi network — The robot cannot join the home Wi-Fi, so app control fails.
- DEEBOT is not charging — The robot is docked but not taking a charge.
- DEEBOT is stuck when cleaning with OZMO Pro installed — With the OZMO Pro oscillating mopping system fitted, the robot gets stuck.
- DEEBOT misses cleaning spots to be cleaned, or repeats cleaning the area cleaned — Some spots are skipped while other areas are cleaned more than once.
- DEEBOT returns to the Docking Station before it has finished cleaning — The robot goes back to recharge before the cleaning job is done.
- DEEBOT Side Brushes drop out of place during use — A side brush comes off while the robot is cleaning.