Ecovacs Robot vacuum Deebot T9 DEEBOT is not able to connect to the home Wi-Fi network

What this problem usually means

The robot cannot join the home Wi-Fi, so app control fails.

Likely causes

  1. Incorrect home Wi-Fi username or password entered
  2. Incorrect App installed
  3. DEEBOT is not within range of your home Wi-Fi signal
  4. Network setup was started before DEEBOT was ready
  5. DEEBOT does not support 5 GHz Wi-Fi

How to fix it — step by step

  1. Enter the correct home Wi-Fi username and password
  2. Download and install the ECOVACS HOME App
  3. Make sure DEEBOT is within range of your home Wi-Fi signal
  4. Turn ON the Power Switch and press the RESET Button; DEEBOT is ready for network setup when its Wi-Fi Indicator light flashes slowly
  5. Connect the robot to a 2.4 GHz Wi-Fi network

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Ecovacs Robot vacuum Deebot T9 problems

See all Ecovacs Deebot T9 codes & guides →