Ecovacs Robot vacuum Deebot Ozmo 930 DEEBOT will not charge

What this problem usually means

The robot sits on the Docking Station but does not charge.

Likely causes

  1. DEEBOT is not powered ON
  2. DEEBOT has not made a connection with the Docking Station
  3. Docking Station is unplugged while DEEBOT is powered ON, which causes battery consumption
  4. The battery is completely discharged

How to fix it — step by step

  1. Power ON DEEBOT
  2. Make sure the robot's Charging Contacts have made a connection with the Docking Station Pins; you may move the robot manually to make the connection if necessary
  3. Plug in the Docking Station and ensure DEEBOT is powered ON; keep DEEBOT on the Docking Station so it has a full battery to work at any time
  4. To re-activate a completely discharged battery: Power ON, place DEEBOT on the Docking Station by hand, remove it after charging for 3 minutes, repeat 3 times, then charge normally

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Ecovacs Robot vacuum Deebot Ozmo 930 problems

See all Ecovacs Deebot Ozmo 930 codes & guides →