Ecovacs Robot vacuum Deebot Ozmo 930 DEEBOT is not able to connect to home Wi-Fi network
What this problem usually means
The robot cannot join the home Wi-Fi network.
Likely causes
- Incorrect home Wi-Fi username or password entered
- DEEBOT is not within range of your home Wi-Fi signal
- Network setup was started before DEEBOT was ready
- Your smartphone's operating system needs to be updated
How to fix it — step by step
- Enter the correct home Wi-Fi username and password
- Make sure DEEBOT is within range of your home Wi-Fi signal
- Turn ON the Power Switch and press the RESET Button using a needle for 3 seconds; DEEBOT is ready for network setup when it plays a musical tune and the Wi-Fi indicator flashes slowly
- Update your smartphone's operating system (the ECOVACS App runs on iOS 9.0 and above, Android 4.0 and above)
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Ecovacs Robot vacuum Deebot Ozmo 930 problems
- DEEBOT misses cleaning area
- DEEBOT returns to the Docking Station before it has finished cleaning
- DEEBOT will not charge
- DEEBOT will not clean automatically at scheduled time
- The water is not coming out of the Reservoir when DEEBOT is mopping
- DEEBOT cannot return to the Docking Station
- DEEBOT gets into trouble while working and stops